Buy Dodge PCM | Dodge ECM | Dodge ECU | Dodge Engine Control Module

Ensuring the quality of your Dodge PCM is of paramount importance on your vehicle. Your vehicle may be running too rich or too lean, it may idle rough, or your vehicle may not start altogether. Our sales professionals are all especially knowledgeable in diagnosing these issues and any other issue your vehicle may have while also providing the resources to ensure you have what you need to get your vehicle back on the road. From engine computer to fuse box we have a wide range of electronics available for your Dodge vehicle.

How to replace your Dodge PCM

Before starting feel free to check out our video on YouTube, where we show you how to change your Dodge PCM in less than 15 minutes! Replacing the PCM in your Dodge vehicle is as easy as it gets. If you can change the battery yourself, you should definetly be able to change the PCM on your own and we are going to show you exactly how it's done.

To start, pop open the hood of your car and disconnect the negative terminal. Make sure to turn your headlights on and off so that you can drain any remaining power. Once you are done with that, locate your engine control module. In most Dodge vehicles the engine computer is usually near the top of the engine compartment on the driver side.

Now, carefully unplug the wiring harness from the old PCM. You will also need a wrench with either a 10mm socket or an 8mm socket to remove it from the engine compartment. Next, plug in the Dodge PCM you received from us and just repeat the step mentioned above in reverse order.