Windows, power locks, manual locks, doors, trunk, tailgate, mirrors, power and manual seat controls, seat belts, sunroof, convertible top, glass defects.
N/A
No major problem has been reported
Brake pads, brake rotors, brake calipers, anti-lock braking system (ABS), brake lines, brake master cylinder, brake booster, parking brake, brake sensors, regenerative braking system (if applicable).
The 1991 Dodge W250 has had some issues with transmission failure, mainly due to a lack of lubrication. This problem can lead to significant wear and tear on the transmission components, potentially causing costly repairs if not addressed promptly. Overall, while the truck is known for its durability, keeping an eye on the transmission’s lubrication levels is crucial for maintaining its reliability.
The 1991 Dodge W250 is known to have some issues with engine oil leaks, which can be a bit of a headache for owners. These leaks are often due to worn-out gaskets or seals, and while they can be fixed, they might require a bit of maintenance attention. Overall, if youre considering this truck, just be prepared to keep an eye on the oil levels and address any leaks promptly to maintain its reliability.
The revised rear brake shoes on the 1991 Dodge W250 have shown some improvements in reliability compared to earlier versions. While they generally perform well under normal driving conditions, some users have reported occasional issues with wear and noise. Overall, they seem to be a decent upgrade, but it’s still a good idea to keep an eye on them for any signs of trouble.
The 1991 Dodge W250 is a solid truck, but one issue to keep an eye on is the potential for fuel injector or O-ring seal leaks. These leaks can lead to fuel escaping, which might cause performance issues or even pose a safety risk if not addressed. Overall, while the truck is generally reliable, it’s important to regularly check and maintain these components to avoid any fuel-related problems.
N/A
No major problem has been reported
N/A
No major problem has been reported
N/A
No major problem has been reported
N/A
No major problem has been reported
N/A
No major problem has been reported
Cruise control, keyless entry system, push-button start, wiper motor, warning lights, power mirrors, interior lighting, exterior lighting, dashboard indicators, electronic parking brake, tire pressure monitoring system (TPMS), alarm and security system, remote engine start, heated and ventilated seats, heated steering wheel, wireless charging pad.
N/A
No major problem has been reported
Dashboard rattles, squeaks, wind noise, door seals, weather stripping, water leaks, air leaks, excessive road noise, suspension noise, drivetrain noise, exhaust rattles, engine bay noises.
N/A
No major problem has been reported
N/A
No major problem has been reported
N/A
No major problem has been reported
N/A
No major problem has been reported
The world's top supplier of programmed OEM (Original Equipment Manufacturer) Powertrain Control Modules (PCM), Engine Control Modules (ECM), Injection Control Modules (IDM), Body Control Modules (BCM), Transmission Control Modules (TCM), Engine Control Units and all other car control units. With over a decade in the business, we are the most reliable source when it comes to programming services for replacement engine control modules.
Pressure loss on your vehicle? U3576 flags a Stack Differential Pressure Sensor circuit fault—possible HVAC failure. Scan, inspect wiring, replace sensor.
Coolant mixing valve sensor fault lights up on your vehicle—risking overheating. Scan U3575, test the sensor, and promptly reprogram or replace it.
Coolant temperature spikes or no heat in your vehicle? U3574 signals a faulty Coolant Mixing Valve—run a module scan and arrange reprogramming or replace.
Engine overheating or coolant warning on your vehicle? A faulty coolant mixing valve control circuit can cause temp loss—scan, reprogram or replace now.
Temp gauge spikes and overheating on your vehicle? U3572 means Stack Outlet Coolant Temp Sensor 2 circuit fault—scan or replace to prevent engine damage.
Temp gauge spikes and overheating in your vehicle? Faulty Stack Outlet Coolant Temp Sensor 1 can overheat engine—scan circuit and schedule module repair.
Coolant temperature warning on your vehicle? A Stack Inlet Coolant Temperature Sensor Circuit can cause overheating—scan, test and replace/reprogram.
Warning light or loss of power from your vehicle’s Anode Multifunction Valve? It threatens system reliability—scan the code and replace the valve promptly.
Your vehicle flashes U3568—Anode Multifunction Valve control circuit fault, risking loss of function. Scan, test the circuit, then reprogram or replace.
Power loss or boost warning in your vehicle? A faulty Anode Inlet Pressure Sensor 2 circuit can trigger limp mode—scan, test wiring and replace sensor.
Fuel pressure warning on your vehicle? A faulty Anode Inlet Pressure Sensor 1 circuit can cause erratic fuel delivery—scan the code, test the sensor, an…
Hydrogen pressure warning on your vehicle? Faulty Hydrogen Supply Line A Pressure Sensor 2 circuit can cut fuel‑cell output—scan and replace the sensor.