Windows, power locks, manual locks, doors, trunk, tailgate, mirrors, power and manual seat controls, seat belts, sunroof, convertible top, glass defects.
N/A
No major problem has been reported
Brake pads, brake rotors, brake calipers, anti-lock braking system (ABS), brake lines, brake master cylinder, brake booster, parking brake, brake sensors, regenerative braking system (if applicable).
The 2002 Lexus GS300 is generally known for its reliability, but like any vehicle, it can have its issues. If you’re seeing a check engine light with codes P0135, P0141, P0155, or P0161, it usually points to problems with the oxygen sensors or their heaters. While these issues are relatively common and can affect fuel efficiency, they are typically straightforward to fix and don’t usually indicate a major reliability concern.
The 2002 Lexus GS300 is generally known for its reliability, but one common issue that pops up is the check engine light due to an EVAP system fault. This problem can be a bit of a hassle, as it often involves tracking down leaks or faulty components in the emissions system. However, once addressed, the car tends to run smoothly without major issues.
The 2002 Lexus GS300 is generally known for its reliability, but some owners have reported a creaking type noise coming from the front suspension. This issue can be a bit annoying, especially if you’re driving on uneven roads or making sharp turns. While it’s not a deal-breaker for most, it’s something to keep in mind if you’re considering this model.
The 2002 Lexus GS300 is generally known for its reliability, but some owners have reported issues with a harsh 2-3 shift in the transmission. Fortunately, a software update for the Powertrain Control Module (PCM) has been developed to address this specific problem. Once the update is applied, many drivers have noticed a smoother shifting experience, enhancing the overall driving comfort of this otherwise dependable vehicle.
N/A
No major problem has been reported
N/A
No major problem has been reported
N/A
No major problem has been reported
N/A
No major problem has been reported
N/A
No major problem has been reported
Cruise control, keyless entry system, push-button start, wiper motor, warning lights, power mirrors, interior lighting, exterior lighting, dashboard indicators, electronic parking brake, tire pressure monitoring system (TPMS), alarm and security system, remote engine start, heated and ventilated seats, heated steering wheel, wireless charging pad.
N/A
No major problem has been reported
Dashboard rattles, squeaks, wind noise, door seals, weather stripping, water leaks, air leaks, excessive road noise, suspension noise, drivetrain noise, exhaust rattles, engine bay noises.
N/A
No major problem has been reported
N/A
No major problem has been reported
N/A
No major problem has been reported
N/A
No major problem has been reported
The world's top supplier of programmed OEM (Original Equipment Manufacturer) Powertrain Control Modules (PCM), Engine Control Modules (ECM), Injection Control Modules (IDM), Body Control Modules (BCM), Transmission Control Modules (TCM), Engine Control Units and all other car control units. With over a decade in the business, we are the most reliable source when it comes to programming services for replacement engine control modules.
Pressure loss on your vehicle? U3576 flags a Stack Differential Pressure Sensor circuit fault—possible HVAC failure. Scan, inspect wiring, replace sensor.
Coolant mixing valve sensor fault lights up on your vehicle—risking overheating. Scan U3575, test the sensor, and promptly reprogram or replace it.
Coolant temperature spikes or no heat in your vehicle? U3574 signals a faulty Coolant Mixing Valve—run a module scan and arrange reprogramming or replace.
Engine overheating or coolant warning on your vehicle? A faulty coolant mixing valve control circuit can cause temp loss—scan, reprogram or replace now.
Temp gauge spikes and overheating on your vehicle? U3572 means Stack Outlet Coolant Temp Sensor 2 circuit fault—scan or replace to prevent engine damage.
Temp gauge spikes and overheating in your vehicle? Faulty Stack Outlet Coolant Temp Sensor 1 can overheat engine—scan circuit and schedule module repair.
Coolant temperature warning on your vehicle? A Stack Inlet Coolant Temperature Sensor Circuit can cause overheating—scan, test and replace/reprogram.
Warning light or loss of power from your vehicle’s Anode Multifunction Valve? It threatens system reliability—scan the code and replace the valve promptly.
Your vehicle flashes U3568—Anode Multifunction Valve control circuit fault, risking loss of function. Scan, test the circuit, then reprogram or replace.
Power loss or boost warning in your vehicle? A faulty Anode Inlet Pressure Sensor 2 circuit can trigger limp mode—scan, test wiring and replace sensor.
Fuel pressure warning on your vehicle? A faulty Anode Inlet Pressure Sensor 1 circuit can cause erratic fuel delivery—scan the code, test the sensor, an…
Hydrogen pressure warning on your vehicle? Faulty Hydrogen Supply Line A Pressure Sensor 2 circuit can cut fuel‑cell output—scan and replace the sensor.