{"id":530383,"date":"2026-07-17T09:49:01","date_gmt":"2026-07-17T13:49:01","guid":{"rendered":"https:\/\/www.fs1inc.com\/blog\/?p=530383"},"modified":"2026-07-19T11:47:37","modified_gmt":"2026-07-19T15:47:37","slug":"2010-gmc-sierra-pcm-replacement-guide","status":"publish","type":"post","link":"https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/","title":{"rendered":"2010 GMC Sierra 4.3L: When Your Engine Computer Needs Replacement"},"content":{"rendered":"<div class=\"container\">\n<section class=\"hero\">\n<div class=\"code-badge\">PCM<\/div>\n<h1>2010 GMC Sierra 4.3L: When Your Engine Computer Needs Replacement<\/h1>\n<p class=\"hero-subtitle\">The powertrain control module (PCM) in your 2010 GMC Sierra 4.3L acts as the vehicle\u2019s brain, managing fuel delivery, ignition timing, and emissions systems. Failure may cause erratic engine behavior, poor performance, or a complete no-start condition.<\/p>\n<\/section>\n<div class=\"quick-summary\">\n<h2>Quick Summary<\/h2>\n<ul>\n<li>The PCM controls engine and transmission functions in the 2010 GMC Sierra 4.3L.<\/li>\n<li>Replacement typically requires 1.4 hours of labor for removal and installation.<\/li>\n<li>A relearn procedure of 0.5 hours is needed after installation to sync the module.<\/li>\n<li>Factory procedure mandates capturing ECM data before removal using a scan tool.<\/li>\n<li>Pre-programmed units eliminate the need for post-install dealer programming.<\/li>\n<\/ul>\n<\/div>\n<div class=\"info-section\">\n<p>If your 2010 GMC Sierra 4.3L is experiencing unexplained stalling, rough idling, or a no-start condition, the powertrain control module (PCM) may be at fault. This critical component manages engine performance, fuel efficiency, and emissions compliance. Replacing it involves more than just swapping hardware\u2014proper programming and relearn steps are essential to restore normal operation. Understanding the process helps you avoid unnecessary delays and ensures your vehicle runs as intended after the repair.<\/p>\n<\/div>\n<div class=\"info-section\">\n<h2>What the PCM Does in a 2010 GMC Sierra<\/h2>\n<p>In your 2010 GMC Sierra 4.3L, the powertrain control module (PCM) integrates engine and transmission control into a single unit. It processes data from sensors to optimize fuel injection, ignition timing, and shift points for smooth operation. A failing PCM may disrupt these functions, leading to poor drivability or even preventing the engine from starting. When replacement becomes necessary, <a href=\"https:\/\/www.fs1inc.com\/gm\/gmc-pcm-ecm-ecu-engine-computer\/sierra-c-k-series-engine-computers.html\">replacement engine computers for the Sierra 1500<\/a> are designed to restore factory-level performance, but proper installation and calibration are key to avoiding further issues.<\/p>\n<\/div>\n<div class=\"info-section\">\n<h2>Where the PCM Is Located and What Replacement Involves<\/h2>\n<p>The PCM in your 2010 GMC Sierra 4.3L is typically located near the engine bay, often mounted on the firewall or inner fender. Replacing it involves disconnecting the battery, removing electrical connectors, and unbolting the module. Labor time for removal and reinstallation is 1.4 hours, regardless of whether it\u2019s a Sierra 1500, 2500 HD, or 3500 HD. After installation, a 0.5-hour relearn procedure is required to synchronize the module with the vehicle\u2019s systems.<\/p>\n<figure style=\"margin:22px auto;text-align:center;max-width:720px\"><img decoding=\"async\" style=\"max-width:100%;height:auto;border:1px solid #e2e6ec;border-radius:8px\" src=\"https:\/\/www.fs1inc.com\/blog\/wp-content\/uploads\/2026\/07\/2010-gmc-sierra-pcm-location-diagram.webp\" alt=\"2010 GMC Sierra PCM location diagram\" loading=\"lazy\"\/><figcaption style=\"font-size:13px;color:#667085;margin-top:8px\">PCM mounting location on the 2010 GMC Sierra.<\/figcaption><\/figure>\n<div style=\"background:#f7f9fc;border:1px solid #e2e8f2;border-radius:10px;padding:18px 24px;margin:18px 0\">\n<h3 style='margin-top:0'>How to Reach the PCM on the 2010 GMC Sierra<\/h3>\n<ol style=\"margin:14px 0 6px 0;padding-left:26px\">\n<li style=\"margin:10px 0;line-height:1.65\"><b>Remove<\/b> any debris from around the control module connector.<\/li>\n<li style=\"margin:10px 0;line-height:1.65\"><b>Disconnect<\/b> the negative battery cable.<\/li>\n<li style=\"margin:10px 0;line-height:1.65\"><b>Disconnect<\/b> the ECM electrical.<\/li>\n<li style=\"margin:10px 0;line-height:1.65\"><b>Release<\/b> the ECM upper retaining tabs.<\/li>\n<li style=\"margin:10px 0;line-height:1.65\"><b>Remove<\/b> the ECM from the bracket.<\/li>\n<\/ol>\n<p style='margin:10px 0 0 0'><em>Work with the ignition off, and treat the module as static-sensitive: avoid touching the connector pins at any point.<\/em><\/p>\n<\/div>\n<table style=\"width:100%;border-collapse:collapse;margin:18px 0;font-size:15px\">\n<tr>\n<th style=\"border:1px solid #d6dbe3;background:#f2f5f9;padding:9px 12px;text-align:left\">Operation<\/th>\n<th style=\"border:1px solid #d6dbe3;background:#f2f5f9;padding:9px 12px;text-align:left\">Configuration<\/th>\n<th style=\"border:1px solid #d6dbe3;background:#f2f5f9;padding:9px 12px;text-align:left\">Book Time<\/th>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Powertrain Control Module R&amp;R<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Sierra 1500<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">1.4 hr<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Powertrain Control Module R&amp;R<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Sierra 2500 HD<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">1.4 hr<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Powertrain Control Module R&amp;R<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Sierra 3500 HD<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">1.4 hr<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Powertrain Control Module Relearn<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Sierra 1500<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">0.5 hr<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Powertrain Control Module Relearn<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Sierra 2500 HD<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">0.5 hr<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Powertrain Control Module Relearn<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Sierra 3500 HD<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">0.5 hr<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Engine Control Module Relearn<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Sierra 1500<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">0.5 hr<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Engine Control Module Relearn<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Sierra 2500 HD<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">0.5 hr<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"info-section\">\n<h2>Programming Requirements After Replacement<\/h2>\n<p>Factory procedures for your 2010 GMC Sierra 4.3L require capturing ECM data with a scan tool before removal. After installing a new module, a relearn process is necessary to ensure proper communication with the vehicle\u2019s systems. However, <a href=\"https:\/\/www.fs1inc.com\/2010-gmc-sierra-1500-4-3l-pcm-engine-computer-ecm-ecu-programmed-plug-play.html\">a VIN-programmed replacement unit<\/a> arrives ready to install, eliminating the need for additional dealer programming and reducing downtime. This ensures your Sierra returns to the road without unnecessary delays.<\/p>\n<\/div>\n<div class=\"info-section\">\n<h2>Symptoms of a Failing PCM<\/h2>\n<p>A failing PCM in your 2010 GMC Sierra 4.3L may cause a range of symptoms, including intermittent stalling, rough idling, or a complete no-start condition. You might also notice poor fuel economy, erratic shifting, or the check engine light illuminating with module-related codes. One common fault is <a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p0601-internal-control-module-memory-checksum-error\/\">internal control module memory checksum error<\/a>, which indicates corruption in the PCM\u2019s memory and often requires replacement to resolve.<\/p>\n<\/div>\n<div class=\"info-section\">\n<h2>Module Trouble Codes on the 2010 GMC Sierra<\/h2>\n<p>The 2010 GMC Sierra 4.3L may log specific trouble codes when the PCM malfunctions. These codes help diagnose internal module failures and guide repair decisions.<\/p>\n<table style=\"width:100%;border-collapse:collapse;margin:18px 0;font-size:15px\">\n<tr>\n<th style=\"border:1px solid #d6dbe3;background:#f2f5f9;padding:9px 12px;text-align:left\">Code<\/th>\n<th style=\"border:1px solid #d6dbe3;background:#f2f5f9;padding:9px 12px;text-align:left\">Meaning<\/th>\n<th style=\"border:1px solid #d6dbe3;background:#f2f5f9;padding:9px 12px;text-align:left\">Full Guide<\/th>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p0601-internal-control-module-memory-checksum-error\/\" style=\"color:#0563C1;text-decoration:none;display:block;cursor:pointer\"><b>P0601<\/b><\/a><\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p0601-internal-control-module-memory-checksum-error\/\" style=\"color:#1a2b49;text-decoration:none;display:block;cursor:pointer\">Internal memory checksum error<\/a><\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p0601-internal-control-module-memory-checksum-error\/\" style=\"color:#0563C1\"><b><u>Full P0601 guide &rarr;<\/u><\/b><\/a><\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p0602-control-module-programming-error\/\" style=\"color:#0563C1;text-decoration:none;display:block;cursor:pointer\"><b>P0602<\/b><\/a><\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p0602-control-module-programming-error\/\" style=\"color:#1a2b49;text-decoration:none;display:block;cursor:pointer\">Control module programming error<\/a><\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p0602-control-module-programming-error\/\" style=\"color:#0563C1\"><b><u>Full P0602 guide &rarr;<\/u><\/b><\/a><\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p0603-internal-control-module-keep-alive-memory-kam-error\/\" style=\"color:#0563C1;text-decoration:none;display:block;cursor:pointer\"><b>P0603<\/b><\/a><\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p0603-internal-control-module-keep-alive-memory-kam-error\/\" style=\"color:#1a2b49;text-decoration:none;display:block;cursor:pointer\">Keep-alive memory (KAM) error<\/a><\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p0603-internal-control-module-keep-alive-memory-kam-error\/\" style=\"color:#0563C1\"><b><u>Full P0603 guide &rarr;<\/u><\/b><\/a><\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p0604-internal-control-module-random-access-memory-ram-error\/\" style=\"color:#0563C1;text-decoration:none;display:block;cursor:pointer\"><b>P0604<\/b><\/a><\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p0604-internal-control-module-random-access-memory-ram-error\/\" style=\"color:#1a2b49;text-decoration:none;display:block;cursor:pointer\">Internal RAM error<\/a><\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p0604-internal-control-module-random-access-memory-ram-error\/\" style=\"color:#0563C1\"><b><u>Full P0604 guide &rarr;<\/u><\/b><\/a><\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p062f-internal-control-module-eeprom-error\/\" style=\"color:#0563C1;text-decoration:none;display:block;cursor:pointer\"><b>P062F<\/b><\/a><\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p062f-internal-control-module-eeprom-error\/\" style=\"color:#1a2b49;text-decoration:none;display:block;cursor:pointer\">Internal EEPROM error<\/a><\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p062f-internal-control-module-eeprom-error\/\" style=\"color:#0563C1\"><b><u>Full P062F guide &rarr;<\/u><\/b><\/a><\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p1621-control-module-long-term-memory-performance\/\" style=\"color:#0563C1;text-decoration:none;display:block;cursor:pointer\"><b>P1621<\/b><\/a><\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p1621-control-module-long-term-memory-performance\/\" style=\"color:#1a2b49;text-decoration:none;display:block;cursor:pointer\">Control module long-term memory performance<\/a><\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><a href=\"https:\/\/www.fs1inc.com\/blog\/dtc-p1621-control-module-long-term-memory-performance\/\" style=\"color:#0563C1\"><b><u>Full P1621 guide &rarr;<\/u><\/b><\/a><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"info-section\">\n<h2>Factory Service Bulletins Worth Knowing<\/h2>\n<p>GM service bulletin #08-06-04-006 (updated as #08-06-04-006L) provides guidance for identifying non-GM ECM calibrations and detecting power-up hardware issues in Duramax diesel engines. While your 2010 GMC Sierra 4.3L is not a diesel, the bulletin highlights the importance of verifying calibration IDs and calibration verification numbers (CVNs) during diagnostics. Technicians are advised to photograph Tech 2 calibration data and transmission screens for reference.<\/p>\n<table style=\"width:100%;border-collapse:collapse;margin:18px 0;font-size:15px\">\n<tr>\n<th style=\"border:1px solid #d6dbe3;background:#f2f5f9;padding:9px 12px;text-align:left\">Bulletin<\/th>\n<th style=\"border:1px solid #d6dbe3;background:#f2f5f9;padding:9px 12px;text-align:left\">Subject<\/th>\n<th style=\"border:1px solid #d6dbe3;background:#f2f5f9;padding:9px 12px;text-align:left\">What It Addresses<\/th>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\"><b>08-06-04-006<\/b><\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">Information for Identifying Non-GM ECM Calibration Use and Power-up Hardware Detection in Duram<\/td>\n<td style=\"border:1px solid #d6dbe3;padding:9px 12px\">&mdash;<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"info-section\">\n<h2>Protecting the PCM in Your 2010 GMC Sierra<\/h2>\n<ul style=\"margin:14px 0 6px 0;padding-left:26px\">\n<li style=\"margin:10px 0;line-height:1.65\">Maintain a healthy charging system to prevent voltage spikes that can damage the PCM.<\/li>\n<li style=\"margin:10px 0;line-height:1.65\">Ensure all electrical connectors and grounds are clean and securely fastened.<\/li>\n<li style=\"margin:10px 0;line-height:1.65\">Avoid jump-starting with improper voltage, as it may harm sensitive electronics.<\/li>\n<li style=\"margin:10px 0;line-height:1.65\">Address trouble codes promptly to prevent cascading failures.<\/li>\n<li style=\"margin:10px 0;line-height:1.65\">Keep the PCM connector seals intact to prevent moisture intrusion.<\/li>\n<li style=\"margin:10px 0;line-height:1.65\">Use dielectric grease on connectors to reduce corrosion risk.<\/li>\n<\/ul>\n<\/div>\n<div class=\"info-section\">\n<h2>Frequently Asked Questions<\/h2>\n<h3>Why does my 2010 GMC Sierra 4.3L need a PCM relearn after replacement?<\/h3>\n<p>The relearn procedure synchronizes the new PCM with your Sierra\u2019s engine and transmission systems. This ensures proper fuel delivery, ignition timing, and shift points. Without it, the vehicle may run poorly or fail to start.<\/p>\n<h3>Can I install a used PCM from another 2010 GMC Sierra 4.3L?<\/h3>\n<p>A used PCM may work, but it often requires reprogramming to match your vehicle\u2019s VIN and calibration. This adds time and cost, making a pre-programmed unit a more reliable option.<\/p>\n<h3>What causes a P0603 code in my 2010 GMC Sierra 4.3L?<\/h3>\n<p>P0603 indicates an internal control module keep-alive memory (KAM) error. This typically results from a power loss to the PCM or a failing module, often requiring replacement to resolve.<\/p>\n<\/div>\n<div class=\"info-section\">\n<p>If your 2010 GMC Sierra 4.3L requires a new PCM, you have options. A dealer-installed unit may involve longer wait times and additional programming costs. A pre-programmed replacement eliminates the need for post-install setup, allowing you to get back on the road faster. Consider your priorities\u2014cost, convenience, and reliability\u2014when choosing the best solution for your vehicle.<\/p>\n<figure style=\"margin:22px auto;text-align:center;max-width:720px\"><img decoding=\"async\" style=\"max-width:100%;height:auto;border:1px solid #e2e6ec;border-radius:8px\" src=\"https:\/\/www.fs1inc.com\/media\/wysiwyg\/googleshop\/gmtypeE37\/gm-pcm-typeE37-1.jpg\" alt=\"Refurbished VIN-programmed PCM for the 2010 GMC Sierra\" loading=\"lazy\"\/><figcaption style=\"font-size:13px;color:#667085;margin-top:8px\">A refurbished, VIN-programmed replacement PCM for the 2010 GMC Sierra from Flagship One.<\/figcaption><\/figure>\n<p>Flagship One stocks a <a href=\"https:\/\/www.fs1inc.com\/2010-gmc-sierra-1500-4-3l-pcm-engine-computer-ecm-ecu-programmed-plug-play.html\"><b>refurbished, VIN-programmed PCM for the 2010 GMC Sierra<\/b><\/a> with a lifetime warranty, free shipping and no core charge. The full <a href=\"https:\/\/www.fs1inc.com\/gm\/gmc-pcm-ecm-ecu-engine-computer\/sierra-c-k-series-engine-computers.html\">GMC Sierra module lineup<\/a> covers other engine configurations as well.<\/p>\n<\/div>\n<div class=\"info-section\">\n<h2>Final Thoughts<\/h2>\n<p>A failing PCM in your 2010 GMC Sierra 4.3L can disrupt daily driving, but replacement doesn\u2019t have to be complicated. Understanding the process, from labor time to programming requirements, helps you make informed decisions. Whether you opt for a dealer visit or a pre-programmed unit, restoring your Sierra\u2019s performance is the ultimate goal.<\/p>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>2010 GMC Sierra with 4.3L engine stalling, no-start, or misfire codes may need a new PCM. Learn symptoms, labor time, and why a pre-programmed unit saves hours of dealer setup.<\/p>\n","protected":false},"author":1,"featured_media":520354,"comment_status":"open","ping_status":"closed","sticky":false,"template":"elementor_header_footer","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[258,270],"tags":[441,68,1307],"class_list":["post-530383","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-car","category-gmc","tag-441","tag-gmc","tag-sierra"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.0 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>2010 GMC Sierra 4.3L: When Your Engine Computer Needs Replacement - Flagship One Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"2010 GMC Sierra 4.3L: When Your Engine Computer Needs Replacement - Flagship One Blog\" \/>\n<meta property=\"og:description\" content=\"2010 GMC Sierra with 4.3L engine stalling, no-start, or misfire codes may need a new PCM. Learn symptoms, labor time, and why a pre-programmed unit saves hours of dealer setup.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/\" \/>\n<meta property=\"og:site_name\" content=\"Flagship One Blog\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/flagshipone\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/flagshipone\/\" \/>\n<meta property=\"article:published_time\" content=\"2026-07-17T13:49:01+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-07-19T15:47:37+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.fs1inc.com\/blog\/wp-content\/uploads\/2026\/07\/2010-gmc-sierra-pcm-location-diagram.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"959\" \/>\n\t<meta property=\"og:image:height\" content=\"864\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"author\" content=\"FlagshipOne\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@theflagshipone\" \/>\n<meta name=\"twitter:site\" content=\"@theflagshipone\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"FlagshipOne\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"6 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/2010-gmc-sierra-pcm-replacement-guide\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/2010-gmc-sierra-pcm-replacement-guide\\\/\"},\"author\":{\"name\":\"FlagshipOne\",\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/#\\\/schema\\\/person\\\/a3cf463514bd03eb7656953ef8f75700\"},\"headline\":\"2010 GMC Sierra 4.3L: When Your Engine Computer Needs Replacement\",\"datePublished\":\"2026-07-17T13:49:01+00:00\",\"dateModified\":\"2026-07-19T15:47:37+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/2010-gmc-sierra-pcm-replacement-guide\\\/\"},\"wordCount\":1166,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/2010-gmc-sierra-pcm-replacement-guide\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/2010-gmc-sierra-pcm-location-diagram.webp\",\"keywords\":[\"2010\",\"GMC\",\"Sierra\"],\"articleSection\":[\"Car\",\"GMC\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/2010-gmc-sierra-pcm-replacement-guide\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/2010-gmc-sierra-pcm-replacement-guide\\\/\",\"url\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/2010-gmc-sierra-pcm-replacement-guide\\\/\",\"name\":\"2010 GMC Sierra 4.3L: When Your Engine Computer Needs Replacement - Flagship One Blog\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/2010-gmc-sierra-pcm-replacement-guide\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/2010-gmc-sierra-pcm-replacement-guide\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/2010-gmc-sierra-pcm-location-diagram.webp\",\"datePublished\":\"2026-07-17T13:49:01+00:00\",\"dateModified\":\"2026-07-19T15:47:37+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/2010-gmc-sierra-pcm-replacement-guide\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/2010-gmc-sierra-pcm-replacement-guide\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/2010-gmc-sierra-pcm-replacement-guide\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/2010-gmc-sierra-pcm-location-diagram.webp\",\"contentUrl\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/2010-gmc-sierra-pcm-location-diagram.webp\",\"width\":959,\"height\":864,\"caption\":\"Factory location diagram for the 2010 GMC Sierra engine control module\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/2010-gmc-sierra-pcm-replacement-guide\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"2010 GMC Sierra 4.3L: When Your Engine Computer Needs Replacement\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/\",\"name\":\"Flagship One Blog\",\"description\":\"Flagship One Inc. OEM Engine Computers  Control Modules\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/#organization\",\"name\":\"Flagship One, Inc.\",\"url\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/wp-content\\\/uploads\\\/2019\\\/06\\\/web-lg-fs1-logo.png\",\"contentUrl\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/wp-content\\\/uploads\\\/2019\\\/06\\\/web-lg-fs1-logo.png\",\"width\":1341,\"height\":1098,\"caption\":\"Flagship One, Inc.\"},\"image\":{\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/flagshipone\",\"https:\\\/\\\/x.com\\\/theflagshipone\",\"https:\\\/\\\/www.instagram.com\\\/flagship_one\",\"https:\\\/\\\/www.youtube.com\\\/channel\\\/UC0oyKphffBM2qkJ-gKPmMXw\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/#\\\/schema\\\/person\\\/a3cf463514bd03eb7656953ef8f75700\",\"name\":\"FlagshipOne\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/351b81e51993825aea73280c48061a7205fdd2189730ebbdee5d63894c5cebb4?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/351b81e51993825aea73280c48061a7205fdd2189730ebbdee5d63894c5cebb4?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/351b81e51993825aea73280c48061a7205fdd2189730ebbdee5d63894c5cebb4?s=96&d=mm&r=g\",\"caption\":\"FlagshipOne\"},\"description\":\"The world's top supplier of programmed OEM (Original Equipment Manufacturer) Powertrain Control Modules (PCM), Engine Control Modules (ECM), Injection Control Modules (IDM), Body Control Modules (BCM), Transmission Control Modules (TCM), Engine Control Units and all other car control units. With over a decade in the business, we are the most reliable source when it comes to programming services for replacement engine control modules.\",\"sameAs\":[\"https:\\\/\\\/www.fs1inc.com\\\/\",\"https:\\\/\\\/www.facebook.com\\\/flagshipone\\\/\",\"https:\\\/\\\/www.instagram.com\\\/flagship_one\\\/\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/fs1inc\"],\"url\":\"https:\\\/\\\/www.fs1inc.com\\\/blog\\\/author\\\/flagship1inc\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"2010 GMC Sierra 4.3L: When Your Engine Computer Needs Replacement - Flagship One Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/","og_locale":"en_US","og_type":"article","og_title":"2010 GMC Sierra 4.3L: When Your Engine Computer Needs Replacement - Flagship One Blog","og_description":"2010 GMC Sierra with 4.3L engine stalling, no-start, or misfire codes may need a new PCM. Learn symptoms, labor time, and why a pre-programmed unit saves hours of dealer setup.","og_url":"https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/","og_site_name":"Flagship One Blog","article_publisher":"https:\/\/www.facebook.com\/flagshipone","article_author":"https:\/\/www.facebook.com\/flagshipone\/","article_published_time":"2026-07-17T13:49:01+00:00","article_modified_time":"2026-07-19T15:47:37+00:00","og_image":[{"width":959,"height":864,"url":"https:\/\/www.fs1inc.com\/blog\/wp-content\/uploads\/2026\/07\/2010-gmc-sierra-pcm-location-diagram.webp","type":"image\/webp"}],"author":"FlagshipOne","twitter_card":"summary_large_image","twitter_creator":"@theflagshipone","twitter_site":"@theflagshipone","twitter_misc":{"Written by":"FlagshipOne","Est. reading time":"6 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/#article","isPartOf":{"@id":"https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/"},"author":{"name":"FlagshipOne","@id":"https:\/\/www.fs1inc.com\/blog\/#\/schema\/person\/a3cf463514bd03eb7656953ef8f75700"},"headline":"2010 GMC Sierra 4.3L: When Your Engine Computer Needs Replacement","datePublished":"2026-07-17T13:49:01+00:00","dateModified":"2026-07-19T15:47:37+00:00","mainEntityOfPage":{"@id":"https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/"},"wordCount":1166,"commentCount":0,"publisher":{"@id":"https:\/\/www.fs1inc.com\/blog\/#organization"},"image":{"@id":"https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/#primaryimage"},"thumbnailUrl":"https:\/\/www.fs1inc.com\/blog\/wp-content\/uploads\/2026\/07\/2010-gmc-sierra-pcm-location-diagram.webp","keywords":["2010","GMC","Sierra"],"articleSection":["Car","GMC"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/","url":"https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/","name":"2010 GMC Sierra 4.3L: When Your Engine Computer Needs Replacement - Flagship One Blog","isPartOf":{"@id":"https:\/\/www.fs1inc.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/#primaryimage"},"image":{"@id":"https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/#primaryimage"},"thumbnailUrl":"https:\/\/www.fs1inc.com\/blog\/wp-content\/uploads\/2026\/07\/2010-gmc-sierra-pcm-location-diagram.webp","datePublished":"2026-07-17T13:49:01+00:00","dateModified":"2026-07-19T15:47:37+00:00","breadcrumb":{"@id":"https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/#primaryimage","url":"https:\/\/www.fs1inc.com\/blog\/wp-content\/uploads\/2026\/07\/2010-gmc-sierra-pcm-location-diagram.webp","contentUrl":"https:\/\/www.fs1inc.com\/blog\/wp-content\/uploads\/2026\/07\/2010-gmc-sierra-pcm-location-diagram.webp","width":959,"height":864,"caption":"Factory location diagram for the 2010 GMC Sierra engine control module"},{"@type":"BreadcrumbList","@id":"https:\/\/www.fs1inc.com\/blog\/2010-gmc-sierra-pcm-replacement-guide\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.fs1inc.com\/blog\/"},{"@type":"ListItem","position":2,"name":"2010 GMC Sierra 4.3L: When Your Engine Computer Needs Replacement"}]},{"@type":"WebSite","@id":"https:\/\/www.fs1inc.com\/blog\/#website","url":"https:\/\/www.fs1inc.com\/blog\/","name":"Flagship One Blog","description":"Flagship One Inc. OEM Engine Computers  Control Modules","publisher":{"@id":"https:\/\/www.fs1inc.com\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.fs1inc.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.fs1inc.com\/blog\/#organization","name":"Flagship One, Inc.","url":"https:\/\/www.fs1inc.com\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.fs1inc.com\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/www.fs1inc.com\/blog\/wp-content\/uploads\/2019\/06\/web-lg-fs1-logo.png","contentUrl":"https:\/\/www.fs1inc.com\/blog\/wp-content\/uploads\/2019\/06\/web-lg-fs1-logo.png","width":1341,"height":1098,"caption":"Flagship One, Inc."},"image":{"@id":"https:\/\/www.fs1inc.com\/blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/flagshipone","https:\/\/x.com\/theflagshipone","https:\/\/www.instagram.com\/flagship_one","https:\/\/www.youtube.com\/channel\/UC0oyKphffBM2qkJ-gKPmMXw"]},{"@type":"Person","@id":"https:\/\/www.fs1inc.com\/blog\/#\/schema\/person\/a3cf463514bd03eb7656953ef8f75700","name":"FlagshipOne","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/351b81e51993825aea73280c48061a7205fdd2189730ebbdee5d63894c5cebb4?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/351b81e51993825aea73280c48061a7205fdd2189730ebbdee5d63894c5cebb4?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/351b81e51993825aea73280c48061a7205fdd2189730ebbdee5d63894c5cebb4?s=96&d=mm&r=g","caption":"FlagshipOne"},"description":"The world's top supplier of programmed OEM (Original Equipment Manufacturer) Powertrain Control Modules (PCM), Engine Control Modules (ECM), Injection Control Modules (IDM), Body Control Modules (BCM), Transmission Control Modules (TCM), Engine Control Units and all other car control units. With over a decade in the business, we are the most reliable source when it comes to programming services for replacement engine control modules.","sameAs":["https:\/\/www.fs1inc.com\/","https:\/\/www.facebook.com\/flagshipone\/","https:\/\/www.instagram.com\/flagship_one\/","https:\/\/www.linkedin.com\/company\/fs1inc"],"url":"https:\/\/www.fs1inc.com\/blog\/author\/flagship1inc\/"}]}},"_links":{"self":[{"href":"https:\/\/www.fs1inc.com\/blog\/wp-json\/wp\/v2\/posts\/530383","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fs1inc.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fs1inc.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.fs1inc.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fs1inc.com\/blog\/wp-json\/wp\/v2\/comments?post=530383"}],"version-history":[{"count":2,"href":"https:\/\/www.fs1inc.com\/blog\/wp-json\/wp\/v2\/posts\/530383\/revisions"}],"predecessor-version":[{"id":538266,"href":"https:\/\/www.fs1inc.com\/blog\/wp-json\/wp\/v2\/posts\/530383\/revisions\/538266"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.fs1inc.com\/blog\/wp-json\/wp\/v2\/media\/520354"}],"wp:attachment":[{"href":"https:\/\/www.fs1inc.com\/blog\/wp-json\/wp\/v2\/media?parent=530383"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fs1inc.com\/blog\/wp-json\/wp\/v2\/categories?post=530383"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fs1inc.com\/blog\/wp-json\/wp\/v2\/tags?post=530383"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}