This Engine Computer also referred to as an Engine Control Module (ECM), Engine Control Unit (ECU) & Powertrain Control Module (PCM) is guaranteed to fit all 2005 Ford Escape models with a 3.0L engine size. The following part numbers are compatible with this unit:
5L8A-12A650-AAA, 5L8A-12A650-AAB, 5L8A-12A650-AAC, 5L8A-12A650-AAD, 5L8A-12A650-AB, 5L8A-12A650-ABD, 5L8A-12A650-AC, 5L8A-12A650-ACD, 5L8A-12A650-ADD, 5L8A-12A650-AYA, 5L8A-12A650-BDA, 5L8A-12A650-LC, 5L8A-12A650-LD, 5L8A-12A650-LE, 5L8A-12A650-LF, 5L8A-12A650-LG, 5L8A-12A650-LH, 5L8A-12A650-PC, 5L8A-12A650-PD, 5L8A-12A650-PE, 5L8A-12A650-PF, 5L8A-12A650-RC, 5L8A-12A650-RD, 5L8A-12A650-RE, 5L8A-12A650-RF, 5L8A-12A650-SA, 5L8A-12A650-SB, 5L8A-12A650-SC, 5L8A-12A650-SD, 5L8A-12A650-SE, 5L8A-12A650-SF, 5L8A-12A650-SG, 5L8A-12A650-SH, 5U7A-12A650-FCA, 6L8A-12A650-JB, 6L8A-12A650-KB, 6L8A-12A650-XA, 6L8A-12A650-XB, 6L8A-12A650-ZA, 6L8A-12A650-ZB, 6U7A-12A650-BTA, 6U7A-12A650-BUA & 6U7A-12A650-BVA
This unit will arrive Programmed, Flashed & Updated to your vehicle's VIN (Vehicle Identification Number) with the most recent manufacturer updates. These updates will help improve the performance and fuel economy of your vehicle.
Included with the purchase of this unit is a pair of uncut keys. These keys will be programmed to your vehicle and it's engine computer so that you won't need a Locksmith or Manufacturer Dealership to reprogram them. You will need to have them cut to match the original key by a Locksmith or Hardware store.
NOTE: We will need your VIN number in order to program the unit. During the checkout process, please enter your VIN Number in the text box labeled "VIN" located at the top of the Billing Information section.
Don't have your VIN number on hand? Not a problem, you can send it to us later by e-mail (firstname.lastname@example.org) or by phone (516-766-2223)
Key Cycling / Programming Installation Instructions
1) Insert first key into the Ignition
2) Turn the first key to the Ignition 'On' position for 3 seconds, then remove
3) Insert the second key and turn it to the Ignition 'On' position for 3 seconds, then remove
4) Repeat Step 3 with your original key if you would also like it to be programmed to work with your new computer.